Volume 3, Issue 4, August 2013, Pages 1086–1093
Amir Samimi1, Ali Bagheri2, Sepanta Dokhani3, Sepehr Azizkhani4, and Ehsan Godini5
1 Ph.D. of Science in Chemical engineering, Process Engineer & Risk Specialist of Oil and Gas Refinery Company, Iran
2 Department of Engineering, Saveh Branch, Islamic Azad University, Saveh, Iran
3 Department of Chemical Engineering, Shahreza Branch, Islamic Azad University, Shahreza, Iran
4 Department of Chemical Engineering, Shahreza Branch, Islamic Azad University, Shahreza, Iran
5 Department of Chemical Engineering, Shahreza Branch, Islamic Azad University, Shahreza, Iran
Original language: English
Copyright © 2013 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
EOR method evaluation is performing for petroleum gravity, stone type, and tank humectant and tank localities conditions for liquid injection. If the frame is humectant, petroleum exit will perform whenever the pressure is more than threshold; this is controllable by the height of tank block. Experiments and experimental data for recovery capillary absorption are according to data in 1950. Brownscoble & Dyse (1952) studied the ability of water absorption in the sandstone lands. The studies have been done on the tube lines, land and the metal workforces that are related to the oil and gas industries, shows that in most cases, weld lines and edge of a sharp regions has been influencing on location of corrosion and eroding of effective thickness of coating film. In this study we studied EOR methods for dense oil recovery from mold in the breakage tanks. Analyze and comparison of recovery with capillarity of salty water, polymeric solution and hot water on different sample of rocks showed high recovery of dense row oil in the EOR methods, and it is more detected in the diluted row oil. Oil (diluted) can recover by water injection in the sand stone condition and with chemical matter and thermal methods. Hot water recovery is more rapid and higher than chemical recovery.
Author Keywords: EOR, Petroleum, Water, Oil, Gas Industries, Chemical recovery.
Amir Samimi1, Ali Bagheri2, Sepanta Dokhani3, Sepehr Azizkhani4, and Ehsan Godini5
1 Ph.D. of Science in Chemical engineering, Process Engineer & Risk Specialist of Oil and Gas Refinery Company, Iran
2 Department of Engineering, Saveh Branch, Islamic Azad University, Saveh, Iran
3 Department of Chemical Engineering, Shahreza Branch, Islamic Azad University, Shahreza, Iran
4 Department of Chemical Engineering, Shahreza Branch, Islamic Azad University, Shahreza, Iran
5 Department of Chemical Engineering, Shahreza Branch, Islamic Azad University, Shahreza, Iran
Original language: English
Copyright © 2013 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Abstract
EOR method evaluation is performing for petroleum gravity, stone type, and tank humectant and tank localities conditions for liquid injection. If the frame is humectant, petroleum exit will perform whenever the pressure is more than threshold; this is controllable by the height of tank block. Experiments and experimental data for recovery capillary absorption are according to data in 1950. Brownscoble & Dyse (1952) studied the ability of water absorption in the sandstone lands. The studies have been done on the tube lines, land and the metal workforces that are related to the oil and gas industries, shows that in most cases, weld lines and edge of a sharp regions has been influencing on location of corrosion and eroding of effective thickness of coating film. In this study we studied EOR methods for dense oil recovery from mold in the breakage tanks. Analyze and comparison of recovery with capillarity of salty water, polymeric solution and hot water on different sample of rocks showed high recovery of dense row oil in the EOR methods, and it is more detected in the diluted row oil. Oil (diluted) can recover by water injection in the sand stone condition and with chemical matter and thermal methods. Hot water recovery is more rapid and higher than chemical recovery.
Author Keywords: EOR, Petroleum, Water, Oil, Gas Industries, Chemical recovery.
How to Cite this Article
Amir Samimi, Ali Bagheri, Sepanta Dokhani, Sepehr Azizkhani, and Ehsan Godini, “Calculation of Corrosion in Oil and Gas Refinery with EOR Method,” International Journal of Innovation and Applied Studies, vol. 3, no. 4, pp. 1086–1093, August 2013.
