Volume 30, Issue 4, October 2020, Pages 791–796
Mohammad Ashraful Alam1, Md. Mahbubur Rahman2, Md. Shariful Alam3, and Suraiya Ireen4
1 Department of Textile Engineering, Green University, Dhaka, Bangladesh
2 Department of Textile Engineering, Green University, Dhaka, Bangladesh
3 Department of Textile Engineering, Green University, Dhaka, Bangladesh
4 Department of Textile Engineering, Green University, Dhaka, Bangladesh
Original language: English
Copyright © 2020 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Digital technology acts as a driving force of modern civilization, have led to significant changes in everyday life, made possible by the widespread use of computers. Based on the utilization of 3D CAD simulation, the product development in the clothing industry becomes faster and faster. The integration of 3D CAD systems for garment design leads to higher accurate cloth fitting which in previously took a long time to match the actual measurement demanded by the buyer using real time dummy. The purpose of this paper is to investigate the use of 3D CAD with computer simulation to facilitate better body fitting during construction without using physical dummy by converting 2D CAD into virtual 3D prototype using CAD software. Our aim is to conceptualize a system that allows the designer to develop a product precisely as per buyer requirement to ensure the best quality service with the least span of time.
Author Keywords: Apparel, CAD, 3D, Garment, Fitting, Simulation, measurement.
Mohammad Ashraful Alam1, Md. Mahbubur Rahman2, Md. Shariful Alam3, and Suraiya Ireen4
1 Department of Textile Engineering, Green University, Dhaka, Bangladesh
2 Department of Textile Engineering, Green University, Dhaka, Bangladesh
3 Department of Textile Engineering, Green University, Dhaka, Bangladesh
4 Department of Textile Engineering, Green University, Dhaka, Bangladesh
Original language: English
Copyright © 2020 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Abstract
Digital technology acts as a driving force of modern civilization, have led to significant changes in everyday life, made possible by the widespread use of computers. Based on the utilization of 3D CAD simulation, the product development in the clothing industry becomes faster and faster. The integration of 3D CAD systems for garment design leads to higher accurate cloth fitting which in previously took a long time to match the actual measurement demanded by the buyer using real time dummy. The purpose of this paper is to investigate the use of 3D CAD with computer simulation to facilitate better body fitting during construction without using physical dummy by converting 2D CAD into virtual 3D prototype using CAD software. Our aim is to conceptualize a system that allows the designer to develop a product precisely as per buyer requirement to ensure the best quality service with the least span of time.
Author Keywords: Apparel, CAD, 3D, Garment, Fitting, Simulation, measurement.
How to Cite this Article
Mohammad Ashraful Alam, Md. Mahbubur Rahman, Md. Shariful Alam, and Suraiya Ireen, “Influence of 3D CAD in Apparel Industry as a Prominent Tool for Checking Garment Fitting,” International Journal of Innovation and Applied Studies, vol. 30, no. 4, pp. 791–796, October 2020.
