[ Diseño de un bloque integrador analógico para un oscilador caótico ]
Volume 28, Issue 2, January 2020, Pages 333–341
Dulce Idalia Rivera Huerta1, Gustavo Daniel Martínez Ortega2, José Antonio Ramírez Santiago3, Oscar Daniel López Melo4, and Gregorio Castillo Quiroz5
1 Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México, Instituto Tecnológico Superior de Huauchinango, Puebla, Mexico
2 Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México, Instituto Tecnológico Superior de Huauchinango, Puebla, Mexico
3 Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México, Instituto Tecnológico Superior de Huauchinango, Puebla, Mexico
4 Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México, Instituto Tecnológico Superior de Huauchinango, Puebla, Mexico
5 Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de , Instituto Tecnológico Superior de Huauchinango, Huauchinango, Puebla, Mexico
Original language: Spanish
Copyright © 2020 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
At present, the transport of information has become more common, being easier to access it with new technologies, which is why different ways of protecting the sending or transport of it are sought. Continuous chaotic oscillators in time are a special type of non-linear circuits that behave in an aperiodic manner, this being a very useful tool for the protection of information. The objective of this project is to start the creation of a block belonging to an analogue chaotic system, in the future to be able to define all the elements that conform to it, and achieve the creation of the system completely, with analog electronics, through the use of design and code creation software, some basic tests of the operation of MOSFET were performed, to know its function within the creation of the integrator block, and to be able to define all the standards for the correct design of an internal circuit known as OTA Miller, This being our base for the creation of each of the blocks that make up the chaotic system, being the integrating block, the multiplier block and the adding block. Because the applications of the continuous chaotic oscillators in time are carried out through integrated circuits, this work focuses on the development of chaotic oscillator circuits integrated in the long-term chip, this is due to the complexity of the design in this topic , since it was found that the chaotic systems implemented in a chip, it is not so easy to develop, at least the creation of the blocks that make it up is not easy, that is why in this work only the initial design of an integrating block, finding this very useful as a basis for the different building blocks of the system. The achievement of the creation of a chaotic analog system applied to chips or integrated circuits would be a revolutionary way to protect information.
Author Keywords: Integrator block, electronics, protection, signals, chaotic system.
Volume 28, Issue 2, January 2020, Pages 333–341
Dulce Idalia Rivera Huerta1, Gustavo Daniel Martínez Ortega2, José Antonio Ramírez Santiago3, Oscar Daniel López Melo4, and Gregorio Castillo Quiroz5
1 Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México, Instituto Tecnológico Superior de Huauchinango, Puebla, Mexico
2 Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México, Instituto Tecnológico Superior de Huauchinango, Puebla, Mexico
3 Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México, Instituto Tecnológico Superior de Huauchinango, Puebla, Mexico
4 Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de México, Instituto Tecnológico Superior de Huauchinango, Puebla, Mexico
5 Departamento de Ingeniería Mecatrónica, Tecnológico Nacional de , Instituto Tecnológico Superior de Huauchinango, Huauchinango, Puebla, Mexico
Original language: Spanish
Copyright © 2020 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Abstract
At present, the transport of information has become more common, being easier to access it with new technologies, which is why different ways of protecting the sending or transport of it are sought. Continuous chaotic oscillators in time are a special type of non-linear circuits that behave in an aperiodic manner, this being a very useful tool for the protection of information. The objective of this project is to start the creation of a block belonging to an analogue chaotic system, in the future to be able to define all the elements that conform to it, and achieve the creation of the system completely, with analog electronics, through the use of design and code creation software, some basic tests of the operation of MOSFET were performed, to know its function within the creation of the integrator block, and to be able to define all the standards for the correct design of an internal circuit known as OTA Miller, This being our base for the creation of each of the blocks that make up the chaotic system, being the integrating block, the multiplier block and the adding block. Because the applications of the continuous chaotic oscillators in time are carried out through integrated circuits, this work focuses on the development of chaotic oscillator circuits integrated in the long-term chip, this is due to the complexity of the design in this topic , since it was found that the chaotic systems implemented in a chip, it is not so easy to develop, at least the creation of the blocks that make it up is not easy, that is why in this work only the initial design of an integrating block, finding this very useful as a basis for the different building blocks of the system. The achievement of the creation of a chaotic analog system applied to chips or integrated circuits would be a revolutionary way to protect information.
Author Keywords: Integrator block, electronics, protection, signals, chaotic system.
Abstract: (spanish)
En la actualidad, el transporte de información se ha vuelto más común, siendo más fácil acceder a ella con las nuevas tecnologías, es por ello que se buscan distintas formas de proteger él envió o transporte de la misma. Los osciladores caóticos continuos en el tiempo son un tipo especial de circuitos no lineales que se comportan de manera aperiódica, siendo este una herramienta muy útil para la protección de información. El objetivo de este proyecto es comenzar la creación de un bloque perteneciente a un sistema caótico de manera analógica, para en un futuro poder definir todos los elementos que conforman al mismo, y lograr la creación del sistema completamente, con electrónica analógica, mediante el uso de software de diseño y creación de códigos, se realizaron algunas pruebas básicas del funcionamiento de MOSFET, para conocer su función dentro de la creación del bloque integrador, y poder definir todos los estándares para el correcto diseño de un circuito interno conocido como OTA Miller, siendo este nuestra base para la creación de cada uno de los bloques que conforman el sistema caótico, siendo el bloque integrador, el bloque multiplicador y el bloque sumador. Debido a que las aplicaciones de los osciladores caóticos continuos en el tiempo se realizan a través de circuitos integrados, este trabajo se enfoca al tema del desarrollo de circuitos osciladores caóticos integrados en chip a largo plazo, esto es por la complejidad del diseño en este tema, ya que se encontró que los sistemas caóticos implementados en un chip, no es tan fácil de desarrollar, al menos la creación de los bloques que lo conforman no es nada sencillo, es por ello que en este trabajo solo se presenta el diseño inicial de un bloque integrador, encontrando este muy útil como base para los distintos bloques conformantes del sistema. El logro de la creación de un sistema caótico analógico aplicado a chips o circuitos integrados, sería una forma revolucionaria para la protección de información.
Author Keywords: bloque integrador, electrónica, protección, señales, sistema caótico.
How to Cite this Article
Dulce Idalia Rivera Huerta, Gustavo Daniel Martínez Ortega, José Antonio Ramírez Santiago, Oscar Daniel López Melo, and Gregorio Castillo Quiroz, “Design of an analog integrator block for a chaotic oscillator,” International Journal of Innovation and Applied Studies, vol. 28, no. 2, pp. 333–341, January 2020.
