Volume 3, Issue 3, July 2013, Pages 866–870
Fasil Alemayehu Hayilu1 and Omprakash Sahu2
1 Department of Chemical Engineering, KIOT, Wollo University, Kombolcha, Ethiopia
2 Department of Chemical Engineering, KIOT, Wollo University, Kombolcha, Ethiopia
Original language: English
Copyright © 2013 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
In modern construction, ceramic tile and mosaic which are used for finishing and decoration are attached to the surface by using tile adhesives. It was a long way for tiling technology to arrive at the current cement based modified adhesive. The development in additives and modifier are the paramount factor to improve workability, higher flexibility, and better adhesion. In this document tile adhesive has been produced for economical and high performance formulation. These products have been produced by considering the effect of aggregate. These two products with different size of aggregate have been compared and tested. The test made was slip, bending, and compression test. Economical formulation consists of components like cement, quartz sand, cellulose ether and tartaric acid. But high performance consists of limestone and cellulose fiber in addition to these components. The modifier added has enhanced the final product resistance to sliding, bending and compression strength. In terms of compression strength test about 17.27% high performance is stronger than economical formulation. And in addition high performance is stronger than economical formulation by about 16.89% in terms of bending strength. The other thing is the effect of grain size, the component that has low grain size have shown great strength and resistant to slide.
Author Keywords: Aggregate, Compression, Formulation, Modifier, Strength.
Fasil Alemayehu Hayilu1 and Omprakash Sahu2
1 Department of Chemical Engineering, KIOT, Wollo University, Kombolcha, Ethiopia
2 Department of Chemical Engineering, KIOT, Wollo University, Kombolcha, Ethiopia
Original language: English
Copyright © 2013 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Abstract
In modern construction, ceramic tile and mosaic which are used for finishing and decoration are attached to the surface by using tile adhesives. It was a long way for tiling technology to arrive at the current cement based modified adhesive. The development in additives and modifier are the paramount factor to improve workability, higher flexibility, and better adhesion. In this document tile adhesive has been produced for economical and high performance formulation. These products have been produced by considering the effect of aggregate. These two products with different size of aggregate have been compared and tested. The test made was slip, bending, and compression test. Economical formulation consists of components like cement, quartz sand, cellulose ether and tartaric acid. But high performance consists of limestone and cellulose fiber in addition to these components. The modifier added has enhanced the final product resistance to sliding, bending and compression strength. In terms of compression strength test about 17.27% high performance is stronger than economical formulation. And in addition high performance is stronger than economical formulation by about 16.89% in terms of bending strength. The other thing is the effect of grain size, the component that has low grain size have shown great strength and resistant to slide.
Author Keywords: Aggregate, Compression, Formulation, Modifier, Strength.
How to Cite this Article
Fasil Alemayehu Hayilu and Omprakash Sahu, “Tile adhesive production by Inorganic materials,” International Journal of Innovation and Applied Studies, vol. 3, no. 3, pp. 866–870, July 2013.
