The main objective of this study is to estimate the drying parameters of cassava using an indirect solar dryer equipped with a sensible heat energy storage system. This dryer, which uses stones as storage material and made of wood and plywood, was used to dry a quantity of 12.2 kg of cassava. Drying parameters relating to drying curves and drying efficiency of cassava were established and studied. The drying curves were modeled using semi-empirical models. The results showed that the water content of cassava decreased from 159.12 g H2O / 100 g dry matter to 13.32 g H2O / 100 g dry matter. With a collector and drying efficiency of 56.64% and 29.39% respectively. The Weibull distribution model allows a satisfactory modeling of the drying curve, with an r2 = 0.988, a χ2 = 0.000896, and an RMSE = 0.0288.

This study shows a simulation with the HOMER software of a hybrid system composed exclusively of renewable energy sources including a solar photovoltaic generator of 50 kW, a 50 kW wind generator and a 50 kW biogas generator linked to a 50 kW converter in Blekoum (rural area of the Abengourou region) fed to date by a 42 kVA diesel generator with a 5000 liters tank. After having modelled the load to satisfy and integrated the wind potential, the sunshine and the biomass residue potential, we carried out the calculation with HOMER. From the three scenarios of hybrid systems after optimization by HOMER, it is appear that, with regard to energy production, the hybrid system produces an average value of 277.364 kWh/year while the 42 kVA generator produces 105.108 kWh/year. The average price per kWh per year one is 481 172.453 FCFA for the hybrid system and 401 491.799 FCFA for the diesel generator. The emissions of gaseous pollutants are very high with the diesel generator where the values of CO2 are raised to 142.933kg/year; CO at 353 kg/year and SO2 at 287 kg/year while the hybrid system allows to preserve our climate by lowering these values respectively CO2 to 33.533 kg/year; CO to 1.261 kg/year and SO2 to 0 kg/year.

This prospective study aimed to mitigate the emission of hydrocarbon gases and economic or energy losses. It consisted in designing a storage system for this volatile fluid, based on local materials, capable of ensuring thermal comfort, under natural conditions of terrestrial heating. In view of their respective theoretical availability, accessibility and thermal conductivity, cotton, sand and shea cake have been identified as potential insulators. For this purpose, identical samples of the fuel were buried, each with a specific material. They were respectively subjected to a fraction of solar energy, transmitted according to the thermal properties of the material crossed. The monitoring of the evolution of the different evaporation rates per sample made it possible to classify the insulation tested in order of performance in non-evaporation rate: 1st) shea cake with 90.81%; 2nd) cotton, 89.29%; 3rd) sand, 85.05% and 4th) air, 80.68%. In the light of a multi-criteria analysis by Thomas Saaty, based on more restrictive ecological and economic constraints, shea cake and sand were preferentially chosen. They made it possible to build a fuel storage matrix, called “Eco1-stoc”, which recorded an experimental non-evaporation rate of 91.53%. Therefore, the Eco1-stoc can be one of the solutions to be advised in operating conditions similar to those of Korhogo.