Volume 24, Issue 4, November 2018, Pages 1726–1730
Kadiolotien SORO1, Aka TANOH2, and Aka S. Koffi3
1 Doctorant à l’Ecole Doctorale Polytechnique / UMRI Electricité et Electronique Appliquée BP 1093 Yamoussoukro, Côte d’Ivoire
2 Maitre de Conférence à Institut National Polytechnique Houphouët Boigny, BP 1093 Yamoussoukro, Côte d’Ivoire
3 Énergie et Innovation Technologique (EnIT), Laboratory of Physics of Condensed Matter and Technology, University of Félix Houphouët-Boigny / UFR Sciences of the Structures of Matter and Technology, 22 B P 582Cocody Abidjan, Côte d’Ivoire
Original language: French
Copyright © 2018 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
This article is contribution on the digital analysis of the RLC model of the earth connector. The RLC model of the earth connector was feigned on MATLAB. These simulations were made with the horizontal earth connector and the vertical earth connector with a ground of resistivity 1000Ω.m and on the other hand with a ground of resistivity 2000Ω.m. The results obtained by feigning on MATLAB both electrodes show that earth connectors must be buried in depths superior or equal to 6 meters. The relevance of this article, it is to help to determine the depths to which the earth connectors of the model RLC can be buried.
Author Keywords: Grounding Impedance, earth connector, high frequency, RLC model.
Kadiolotien SORO1, Aka TANOH2, and Aka S. Koffi3
1 Doctorant à l’Ecole Doctorale Polytechnique / UMRI Electricité et Electronique Appliquée BP 1093 Yamoussoukro, Côte d’Ivoire
2 Maitre de Conférence à Institut National Polytechnique Houphouët Boigny, BP 1093 Yamoussoukro, Côte d’Ivoire
3 Énergie et Innovation Technologique (EnIT), Laboratory of Physics of Condensed Matter and Technology, University of Félix Houphouët-Boigny / UFR Sciences of the Structures of Matter and Technology, 22 B P 582Cocody Abidjan, Côte d’Ivoire
Original language: French
Copyright © 2018 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Abstract
This article is contribution on the digital analysis of the RLC model of the earth connector. The RLC model of the earth connector was feigned on MATLAB. These simulations were made with the horizontal earth connector and the vertical earth connector with a ground of resistivity 1000Ω.m and on the other hand with a ground of resistivity 2000Ω.m. The results obtained by feigning on MATLAB both electrodes show that earth connectors must be buried in depths superior or equal to 6 meters. The relevance of this article, it is to help to determine the depths to which the earth connectors of the model RLC can be buried.
Author Keywords: Grounding Impedance, earth connector, high frequency, RLC model.
Abstract: (french)
Cet article est une contribution sur l’analyse numérique du modèle RLC de la prise de terre. Le modèle RLC de la prise de terre a été simulé sur MATLAB. Ces simulations ont été faites avec la prise de terre horizontale et la prise de terre verticale avec un sol de résistivité 1000Ω.m et d’autre part avec un sol de résistivité 2000Ω.m. Les résultats obtenus en simulant sur MATLAB les deux électrodes montrent que les prises de terre doivent être enterrées à des profondeurs supérieures ou égales à 6 mètres. La pertinence de cet article, c’est d’aider à déterminer les profondeurs auxquelles peuvent être enterrées les prises de terre du modèle RLC.
Author Keywords: Impédance de terre, prise de terre, haute fréquence, modèle RLC.
How to Cite this Article
Kadiolotien SORO, Aka TANOH, and Aka S. Koffi, “ETUDE NUMERIQUE DU MODELE CIRCUIT RLC D’UNE PRISE DE TERRE,” International Journal of Innovation and Applied Studies, vol. 24, no. 4, pp. 1726–1730, November 2018.
